Jump to content

Rate this topic


gabrychu

Recommended Posts

gabrychu

Version: 6.2.2-24922-6

Cytat

Version: 6.2.2-24922-6 (2020-03-17)

Important Note

The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

This update will restart your Synology NAS.

What's New

RS4017xs+ now supports D4EC-2666-16G memory module.

Fixed Issues

Improved drive migration compatibility for certain combinations of devices and DSM versions.

Improved the stability of iSCSI sessions on VMware hosts running EXSi 6.7 U3.

Fixed an issue where the system might unexpectedly reboot when users run remote virtual machines on certain models in an unstable network environment.

  • Like it 2
Link to post
Share on other sites
  • Administrator

on na pewno jest dostępny ? 

Cytat

This update has been recalled on March 18, since the following models may encounter unexpected system reboot: FS1018, SA3600, SA3400, RS1619xs+, and DS3018xs.

//edit: jest tutaj https://archive.synology.com/download/DSM/criticalupdate/update_pack/24922-6/

ale wycofano dla wspomnianych modeli. W tym mojego ? 

Link to post
Share on other sites
  • 2 weeks later...
  • Administrator

What’s New in DSM 6.2.3-25423

Removed the support for Google Cloud Print in DSM 6.2.3 and above.
To avoid the interruption of iSCSI service, the automatic DSM update and your power schedule to shut down may not be executed as expected if there are any active iSCSI sessions.
Removed TWNIC from the list of DDNS service providers on DSM 6.2.3 since TWNIC will stop accepting new registrations for DSM as of Jul. 1, 2020. Your current TWNIC DDNS services can still be used and edited but will not be available again once deleted from DSM.
This is the last major DSM version (6.2) that supports the video conversion to .flv and MPEG-4 Part 2 on certain models (RS814, RS214, DS414, DS414slim, DS414j, DS216se, DS215j, DS214+, DS214, DS214se, DS213j, DS120j, DS119j, DS115, DS115j, and DS114) in consideration of the termination of Adobe’s support for Flash Player by the end of 2020.
Thin Provisioning LUN will become protected upon insufficient volume space, preventing clients from writing data to the LUN while allowing read-only access to the existing data.
Added support to sign in to DSM using a UPN (user principal name) of a domain via web portal and file protocols.
Added support for the option of forcing password changes for importing local users.
Enhanced the compatibility of the imported user list, providing clearer error messages when the imported file contains syntax errors.
Added support to record only the events of SMB transfer selected by the user, providing transfer logs that meet the requirements more closely.
Added support for client users to monitor the changes of subdirectories under shared folders via SMB protocol.
Added details of desktop notifications to facilitate users’ timely responses.
Added support for external UDF file system devices.
Added support for the Open vSwitch option in a high-availability cluster.
Added support for IP conflict detection, providing logs and notifications accordingly.
Added support for Let’s Encrypt wildcard certificates.
Added support to waive the need of DSM login again through an HTTPS connection after a change in client’s IP address.
Added support for hardware-assisted locking for Thick Provisioning LUN on an ext4 volume.
Added support for customized footer message on DSM login pages.

Fixed Issues
Fixed the issue where certain cities might be mapped to incorrect time zones.
Fixed the issue where LDAP users could not be notified of the upcoming password expiration.
Fixed the issue where the upload of LDAP certificate could not overwrite the original one with the same file name.
Fixed the issue where the application permissions settings might not be applied properly to the Domain Users group when such group in Windows AD domain was named other than “Domain Users”.
Fixed the issue of inaccurate time of usage history in Resource Monitor.
Improved system responsiveness by reducing the latency of the Btrfs file system in certain scenarios.
Fixed the issue where SNMP did not provide the indices of Disk and RAID correctly.
Fixed the issue where the recycle bin of an encrypted shared folder might not be emptied properly.
Enhanced the DSM login performance for multiple concurrent logins.
Adjusted the personal notification mechanism to comply with the latest Gmail API.
Fixed the issue where the iSCSI service might be interrupted when the LUN backup task is stopped.
Removed the function of expanding the capacity of a block LUN.

Known Issues & Limitations
Access to DSM via HTTPS using Google Chrome on a client device running macOS 10.15 might fail after a DSM update from an older version.

https://archive.synology.com/download/DSM/release/6.2.3/25423/

  • Like it 2
Link to post
Share on other sites
  • 4 weeks later...
gabrychu

Version: 6.2.3-25426 (2020-05-13)

Cytat

Version: 6.2.3-25426 (2020-05-13)

Important Note

The update is expected to be available for all regions within the next few weeks, although the time of release in each region may vary slightly. If you want to update to the latest version now, please go to Download Center and manually update your DSM.

This update includes fixes to the below issues mentioned in 6.2.3-25423.

Fixed the issue where the automatic mounting of encrypted shared folders might result in the loss of indexing rules and the failure of the search function.

Fixed the issue where the Synology NAS equipped with NVMe device might be woken up from hibernation by the update of NVMe device's health status cache.

This update will restart your Synology NAS.

Removed the support for Google Cloud Print in DSM 6.2.3 and above.

To avoid the interruption of iSCSI service, the automatic DSM update and your power schedule to shut down may not be executed as expected if there are any active iSCSI sessions.

Removed TWNIC from the list of DDNS service providers on DSM 6.2.3 since TWNIC will stop accepting new registrations for DSM as of Jul. 1, 2020. Your current TWNIC DDNS services can still be used and edited but will not be available again once deleted from DSM.

This is the last major DSM version (6.2) that supports the video conversion to .flv and MPEG-4 Part 2 on certain models (RS814, RS214, DS414, DS414slim, DS414j, DS216se, DS215j, DS214+, DS214, DS214se, DS213j, DS120j, DS119j, DS115, DS115j, and DS114) in consideration of the termination of Adobe's support for Flash Player by the end of 2020.

What's New in DSM 6.2.3

Thin Provisioning LUN will become protected upon insufficient volume space, preventing clients from writing data to the LUN while allowing read-only access to the existing data.

Added support for domain users to sign in to DSM using a UPN (user principal name) via file protocols (including SMB, AFP, FTP, and WebDAV).

Added support for the option of forcing password changes for importing local users.

Enhanced the compatibility of the imported user list, providing clearer error messages when the imported file contains syntax errors.

Added support to record only the events of SMB transfer selected by the user, providing transfer logs that meet the requirements more closely.

Added support for client users to monitor the changes of subdirectories under shared folders via SMB protocol.

Added details of desktop notifications to facilitate users' timely responses.

Added support for external UDF file system devices.

Added support for the Open vSwitch option in a high-availability cluster.

Added support for IP conflict detection, providing logs and notifications accordingly.

Added support for Let's Encrypt wildcard certificates for Synology DDNS.

Added support to waive the need of DSM login again through an HTTPS connection after a change in client's IP address.

Added support for hardware-assisted locking for Thick Provisioning LUN on an ext4 volume.

Added support for customized footer message on DSM login pages.

Fixed Issues

Fixed the issue where certain cities might be mapped to incorrect time zones.

Fixed the issue where LDAP users could not be notified of the upcoming password expiration.

Fixed the issue where the upload of LDAP certificate could not overwrite the original one with the same file name.

Fixed the issue where the application permissions settings might not be applied properly to the Domain Users group when such group in Windows AD domain was named other than "Domain Users".

Fixed the issue of inaccurate time of usage history in Resource Monitor.

Improved system responsiveness by reducing the latency of the Btrfs file system in certain scenarios.

Fixed the issue where SNMP did not provide the indices of Disk and RAID correctly.

Fixed the issue where the recycle bin of an encrypted shared folder might not be emptied properly.

Enhanced the DSM login performance for multiple concurrent logins.

Adjusted the personal notification mechanism to comply with the latest Gmail API.

Fixed the issue where the iSCSI service might be interrupted when the LUN backup task is stopped.

Removed the function of expanding the capacity of a block LUN.

Known Issues & Limitations

Access to DSM via HTTPS using Google Chrome on a client device running macOS 10.15 might fail after a DSM update from an older version.

To run Centralized Management System (CMS) on Surveillance Station after updating to DSM 6.2.3-25426, Surveillance Station 8.2.7 or above is required.

https://archive.synology.com/download/DSM/release/6.2.3/25426/

  • Like it 2
Link to post
Share on other sites
  • Administrator
17 godzin temu, gabrychu napisał:

Version: 6.2.3-25426 (2020-05-13)

i jednocześnie usunięto z ☁️

W dniu 16.04.2020 o 08:22, house napisał:

DSM 6.2.3-25423

?

Link to post
Share on other sites
  • 1 month later...
gabrychu

Version: 6.2.3-25426-1 (2020-06-09)

Cytat

Version: 6.2.3-25426-1

(2020-06-09)

Important Note

Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 6.2.3 installed can be updated to this version.

The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

The update is not required for your Synology NAS. Synology NAS will automatically run a checklist, which checks the services and system configurations, to determine whether this update is required.

Fixed Issues

Fixed the issue where Storage Manager might display an incorrect warning when the size of a storage pool is over 16 TB on certain 32-bit models.

https://archive.synology.com/download/DSM/criticalupdate/update_pack/25426-1/

 

  • Like it 1
Link to post
Share on other sites
  • 4 weeks later...
gabrychu

Version: 6.2.3-25426-2 (2020-07-16)

Cytat

Version: 6.2.3-25426-2 (2020-07-16)

 

Important Note

Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 6.2.3 installed can be updated to this version.

The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

This update will restart your Synology NAS.

 

What's New

Added support for Synology Expansion Unit FX2421.

 

Fixed Issues

Fixed the issue where a DS920+ or DS720+ might not enter hibernation when its connected expansion unit has entered deep sleep.

Fixed the issue where drive status LED indicators on a connected expansion unit might not work properly when the expansion unit wakes up from deep sleep.

Fixed the issue where daylight saving time might not display correctly in certain time zones (e.g., Dublin, Casablanca).

Fixed the issue where mounted remote shared folders on a Synology NAS may cause volumes to operate improperly or the Synology NAS unable to shut down in certain scenarios.

Fixed the issue where the system might incorrectly prompt "drive slot disabled” notice when a DS413 or DS213+ wakes up from deep sleep.

Enhanced the performance in writing a large number of files to a Btrfs volume with RAID 1 configuration using hard disk drives (HDD).

Fixed the issue where Synology Universal Search and Synology Drive might consume excessive CPU resources when the option "Utilize unused memory as database cache to improve (search) performance" has been enabled.

Fixed the issue where domain-related services might not resume working because the update of domain data could not be complete.

Fixed security vulnerabilities (Synology-SA-20:18).

Fixed the issue where the system might incorrectly prompt IP address conflict warning if a network interface card is attached to Synology NAS and the option "Reply to ARP requests if the target IP address is a local address configured on the incoming interface" is disabled.

Fixed the issue where the status of an Ethernet port might not be detected properly when the Ethernet port is not connected to a network cable while Open vSwitch has been enabled.

https://archive.synology.com/download/DSM/criticalupdate/update_pack/25426-2/

  • THX! 2
Link to post
Share on other sites
  • 1 month later...
  • Administrator

? 

Link to post
Share on other sites
  • 3 months later...
  • Administrator

Version: 6.2.3-25426 Update 3 (2020-11-26)

Important Note
Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 6.2.3 installed can be updated to this version.

The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

This update will restart your Synology NAS.

Compatibility & Installation
Photo Station must be updated to version 6.8.14-3501 or above to be compatible with this update.
Spoiler

What's New

Enhanced NFSv4 connection stability.

Increased the maximum number of IP camera channels on FS6400 to 150.

Fixed Issues

Fixed an issue where support ticket submissions might fail in a certain version of Google Chrome.

Fixed an issue where Windows 10, version 2004 virtual machines might fail to power on when users select UEFI as the firmware.

Fixed an issue where there might be network disconnections on Virtual DSM.

Enhanced the stability of SSD caches when multiple processes are accessing the same cache at the same time.

Fixed an issue where CMS managed servers might not connect to the CMS host after they restarted.

Fixed an issue where disks in Resource Monitor performance charts were not displayed in the correct sequence. Affected models include:

21-series: DS1621+

20-series: FS6400, DS1520+, DS920+, DS720+, DS420+, DS220+

Fixed an issue where when users access files on DSM using Windows software via SMB, system performance might be affected. This is because of Windows software's continuous attempts to access the shared folders to which it has no permissions.

Fixed an issue where Windows File Explorer might not update file deletion or removal in real time when folders are mounted via SMB.

Fixed an issue where the system might not report the power status correctly on SA3200D.

Fixed an issue where the setting pages after first-time DSM installation might not launch on Synology NAS models with multiple LAN ports.

Fixed an issue where users were not able to empty the recycle bin of the "usbshare" shared folder.

Fixed an issue where administrators were not able to change the "User must change password at next logon" setting via Windows RSAT.

Fixed an issue where domain users could not be added to built-in groups via Windows RSAT.

Fixed an issue where enabling the "Collect debug logs" option for SMB might result in excessive system space usage.

Fixed an issue where the system might send incorrect port forwarding notifications after a restart.

Fixed an issue where SHA-1 certificates might disappear when users click "Upgrade certificate".

Fixed an issue where DSM might block users' IP addresses and create excessive logs when they tried to sign in after re-installing DSM.

Fixed an issue where incorrect drive compatibility information was displayed after drive migration.

Enhanced the stability of network interface cards on certain models.

Fixed an issue where links in password reset emails did not work when the URLs exceed the maximum length.

Fixed an issue where packages did not update automatically due to dependency problems.

Enhanced SAS controller stability during system shutdowns.

Fixed multiple security vulnerabilities. (Synology-SA-20:26)

Supports Let's Encrypt ISRG certificates.

https://archive.synology.com/download/DSM/criticalupdate/update_pack/25426-3/

Link to post
Share on other sites
  • 2 weeks later...
  • 2 weeks later...

Update do update:

 

Cytat

Version: 6.2.3-25426 Update 3 (2020-12-16)

 

Important Note

Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 6.2.3 installed can be updated to this version.

The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

This update will restart your Synology NAS.

Compatibility & Installation

Photo Station must be updated to version 6.8.14-3501 or above to be compatible with this update.

What's New

Enhanced NFSv4 connection stability.

Increased the maximum number of IP camera channels on FS6400 to 150.

Fixed Issues

Fixed an issue where support ticket submissions might fail in a certain version of Google Chrome.

Fixed an issue where Windows 10, version 2004 virtual machines might fail to power on when users select UEFI as the firmware.

Fixed an issue where there might be network disconnections on Virtual DSM.

Enhanced the stability of SSD caches when multiple processes are accessing the same cache at the same time.

Fixed an issue where CMS managed servers might not connect to the CMS host after they restarted.

Fixed an issue where disks in Resource Monitor performance charts were not displayed in the correct sequence. Affected models include:

21-series: DS1621+

20-series: FS6400, DS1520+, DS920+, DS720+, DS420+, DS220+

Fixed an issue where when users access files on DSM using Windows software via SMB, system performance might be affected. This is because of Windows software's continuous attempts to access the shared folders to which it has no permissions.

Fixed an issue where Windows File Explorer might not update file deletion or removal in real time when folders are mounted via SMB.

Fixed an issue where the system might not report the power status correctly on SA3200D.

Fixed an issue where the setting pages after first-time DSM installation might not launch on Synology NAS models with multiple LAN ports.

Fixed an issue where users were not able to empty the recycle bin of the "usbshare" shared folder.

Fixed an issue where administrators were not able to change the "User must change password at next logon" setting via Windows RSAT.

Fixed an issue where domain users could not be added to built-in groups via Windows RSAT.

Fixed an issue where enabling the "Collect debug logs" option for SMB might result in excessive system space usage.

Fixed an issue where the system might send incorrect port forwarding notifications after a restart.

Fixed an issue where SHA-1 certificates might disappear when users click "Upgrade certificate".

Fixed an issue where DSM might block users' IP addresses and create excessive logs when they tried to sign in after re-installing DSM.

Fixed an issue where incorrect drive compatibility information was displayed after drive migration.

Enhanced the stability of network interface cards on certain models.

Fixed an issue where links in password reset emails did not work when the URLs exceed the maximum length.

Fixed an issue where packages did not update automatically due to dependency problems.

Enhanced SAS controller stability during system shutdowns.

Fixed multiple security vulnerabilities. (Synology-SA-20:26)

Supports Let's Encrypt ISRG certificates.

https://archive.synology.com/download/Os/DSM/6.2.3-25426-3

  • Like it 2
Link to post
Share on other sites
  • 2 months later...
  • Administrator

Version: 6.2.4-25554  (2021-02-23)

Cytat

 

  • Important Note

Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it.

The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

This update will restart your Synology NAS.

  • Compatibility & Installation

Enhanced the password policy. Passwords must exclude usernames and descriptions, include both upper-case and lower-case letters as well as numerical digits. The minimum password length is 8 characters.

Fixed a compatibility issue between the Geminilake platform and virtual machines running Windows 10.

On a newly installed version of DSM, file rename and deletion log events for SMB will be enabled by default.

  • What's New

Users can now set 10 email addresses to receive system notifications.

Enhanced domain database synchronization performance by syncing only altered data.

Supports bad block detection on Synology SSDs.

Supports the updating of Synology HDD and SSD firmware directly via DSM.

Improved fan speed control based on the Synology network interface card temperature for 19-series and newer models.

  • Fixed Issues

Fixed an issue where the "Enable Web Assistant" option didn't work on NVR216 and NVR1218.

Fixed an issue where the date and time formats for scheduled tasks were inconsistent in the widget and system settings.

Fixed an issue where scheduled tasks may fail to be executed or modified.

Fixed an issue where tasks scheduled at a high frequency generated a lot of logs and occupied system partitions.

Fixed an issue where the custom welcome text may differ on the preview and actual login page due to character limits.

Fixed an issue where data could still be written to LUNs after the volume runs out of space.

Fixed an issue where if Wi-Fi dongles are installed, some available network interfaces weren't listed when users edit iSCSI targets.

Fixed an issue where iSCSI services may be unstable when the host is too busy or when users disable iSCSI targets and ending sessions simultaneously.

Fixed an issue where initiators couldn't connect to the iSCSI target after ethernet interfaces reconnect in a high-availability cluster.

Fixed an issue where packages may not operate properly when drives migrated from another Synology NAS cause volume ID conflicts.

Fixed an issue where users may not be able to find their Synology NAS in My Network Places on Windows when WS-Discovery isn't operating properly.

Fixed an issue where Log Center didn't record recycle bin enabling/disabling events.

Fixed a security vulnerability regarding Sudo. (Synology-SA-21:02)

Fixed multiple security vulnerabilities. (Synology-SA-21:03)

  • Limitations

In response to the enhancement of domain database synchronization efficiency, the domain user/group list will be updated once an hour when it is created with Synology Directory Server.

https://archive.synology.com/download/Os/DSM/6.2.4-25554

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • gabrychu
      By gabrychu
      Witam
       
      Szukam system na dysk sieciowy NAS - OpenMediaVault, Xpenology FreeNAS. Co wybrać?
      Mam "stary" komputer w pracy, kilka dysków. Płyta Intel S3200SH, procesor Xeon X3220.
      Ma służyć tylko do przechowywania kopii z kopii. Ewentualnie dołoży mu się jakieś proste zadanie w razie potrzeby.
       
      System Xpenology wygląda ciekawie, ale nie mam pojęcia jak się do tego zabrać.
      Im więcej czytam tym mniej wiem 🙂
      Może ktoś podpowie jak się za to zabrać.
    • house
      By house
      jeśli jednak
      jesteś w kropce 😉 Więc proszę, plik dla architektury x86 :
       exfat_x86.spk

      instalacja zgodnie z : https://www.synology.com/pl-pl/knowledgebase/DSM/tutorial/Service_Application/How_to_install_applications_with_Package_Center#t2.3
       
    • house
      By house
      Widzieli ? Czytali ? Słyszeli ? 
      https://www.theregister.com/2021/02/02/synology_prefers_own_disks/
      Potwierdzono na ostatnim webinarze Synology, że w momencie instalacji dysków nie znajdujących się na liście HCL danego serwera NAS system DSM nie pozwoli na utworzenie nowej puli dyskowej.
      Kij ma dwa końce - skończy się "januszowanie" dyskami WD Green na serwerach RS, z drugiej strony za jakiś czas może się okazać, że DS'y nie obsłużą niczego, co nie jest na liście HCL - idąc dalej - niczego co nie jest ich własnym dyskiem (?). 

      Co o tym sądzicie ?
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. For more information, please see ours Guidelines and Privacy Policy.